Basket Strainers
Large Bore Basket Strainers The Large Bore Basket Strainer commences from 14”NB line size upwards and contains a single angle-top strainer basket for use in permanent applications. It is suitable for mounting in horizontal pipelines and is available with bolted cover as standard. The Barton Firtop Large Bore Basket Strainer Our standard design is of cast construction. We hold a vast stock with bolted covers, although quick release can be catered for through fabrication. The single angle-top strainer basket is constructed from perforated plate and…
Sight Glass
FS_Series Service: Water treatment system; Industrial flow system; Double window indication Material: Body- SS316; Paddle- SS316; Spring- SS316; Guge- Tempered glass; Gasket- Teflon, Gore Tex available; Flange- SS316, SS304 available Max. Working Temperature: 80ºC Max. Working Pressure: 10 kg/cm2 at 25ºC water Connection Size: 2″ Connection Rating: JIS 10K, ANSI 150#, PN10 amd PN16 available F_Series Service: Compatible gas and liquid; Water treatment system; Industrial flow system; Double window indication Material: Body- SS316, SS304, SS316L available; Paddle- SS316; …
Metal Tube Flow Meter
BR250S BR250S for high flows of gas, liquid, steam and oil Case Material: Aluminum alloy case with paint, SS316 available Body Wetted Parts Material: SS316, others on request Indication via magnetic coupling (no sealed) Lens Material: Safety glass Scales Calibrated: in L/H, M3/H, Kg/H, %, etc. Flow Rate for: Water- 30 L/H up to 120,000 L/H (special ranges on request) Air- 0.8 Nm3/H up to 1,200 Nm3/H (special ranges on request) Connection Type: Flange type only Connection Size: 1/2″~5″ Mounting: Vertical and Horizontal…
Orifice / Venturi / Nozzle
Orifice Plate and Flange Orifice Plate Series: Restriction plate; Concentric orifice plate; Quadrant edge orifice plate; Conical entrance orifice plate; Large and small orifice plate; Eccentric orifice plate; Segmental orifice plate; Ring-Joint orifice plate; …
Acrylic Flow Meter
FBC Service: Gas & Liquid Wetted Parts Material: Body- Acrylic plastic, O-ring- NBR (stnadard) and Viton on request Float- SS316, Glass, POM plastic available Valve Material: SS316 Connection Material: SS316 Connection size: 1/8″NPT female Temperature & Pressure Limits: 150psi (10bar) @100ºF (38ºC) Temperature Limit: -24ºC~+54ºC Accuracy: +/-3% F.S Mounting: Vertical position Weight: 0.12 kg DS_Series Service: Water & Air Wetted Parts Material: Body- Acrylic plastic; O-ring- NBR, Viton available Float- magnet cover with Nickel Connection Material: SS316 Connection size: 1/4″NPT, 3/8″NPT, 3/8″PT female…
Electrical gas preheaters
Electrical gas preheaters Heat – for all gases up to 650°C And safety- for operation in EX hazardous areas and for high pressure up to 500 bar. Our solution – tailored exactly to your needs Advantages of ELMESS gas preheaters: designed according to customers’s individual requirements safe and reliable operation simple installation low service requirement long lifetime Design variations Block Type Gas Heater The medium is heated indirectly inside a cotube coil. The tube coil is cast in an aluminum block along with the electric…
Electric air heaters
Electric air heaters The air heaters with integrated electrical heating elements, flange frame or fixing plate as well as casing for electrical connections are laid out and assembled according to the customer’s specifications and operating manual. A higher thermal efficiency is attained using a specific surface load (pa), which is optimally adjusted to the operating conditions. Materials are made of steel or stainless steel according to customer’s instructions. The temperature monitoring for protecting the heater and maintaining of the temperature classification is achieved using temperature…
Ex d / Ex t Temperature sensors
Ex d – flameproof enclosure, for gas zones 1 or 2 Ex t – dust protection by enclosure, for dust areas. The sensor is ATEX and/or IECEx certified, it consist of a replaceable Pt100 or TC sensor element specially adapted for Ex d construction (a standard construction element is not fit to be used with Ex d construction), an Ex d grade connection head and possibly a temperature transmitter (types PR5331A, PR5335A, PR5337A, PR5350A, PR5331D, PR5335D, PR5337D or PR5350B). The enclosure is dust protected (Ex…
Multi-point temperature sensor
Multi-point temperature sensor W-MP / T-MP (datasheet) Features multi-point measurement to a drilled well or a container temperature range -200…+1200 °C Pt100 or thermocouple (TC) standard materials AISI 316L or INCONEL 600, others on request available with a connection box fixed to the flange or to be fixed separately Pt100, accuracy class A, as a standard, more accurate on request TC, class 1 as a standard MI-construction, bendable, vibration proof tailored solutions according to specific needs ATEX-versions, Exi available.
Threaded temperature sensor for separate well
Threaded temperature sensor for separate well W-H-12 / T-H-12, for welded well (datasheet) Features temperature range -200…+1200 °C Pt100 or thermocouple (TC) fits to welded well length of sensing insert 315, 375 or 435 mm, others on request Pt100, accuracy class A, as a standard, more accurate on request TC, class 1 as a standard replaceable inner element, MI-construction tailored solutions according to specific needs ATEX-versions, Ex i and Ex d available.