Threaded temperature sensor for separate well
Threaded temperature sensor for separate well W-H-12 / T-H-12, for welded well (datasheet) Features temperature range -200…+1200 °C Pt100 or thermocouple (TC) fits to welded well length of sensing insert 315, 375 or 435 mm, others on request Pt100, accuracy class A, as a standard, more accurate on request TC, class 1 as a standard replaceable inner element, MI-construction tailored solutions according to specific needs ATEX-versions, Ex i and Ex d available.
Welded temperature sensor
Welded temperature sensor T-D / W-D according to DIN 43772 form 4 (datasheet) Features temperature range – 200…+1200 °C Pt100 or thermocouple (TC) with welded thermowell thermowell material according to the application Pt100, accuracy class A, as a standard, more accurate on request TC, class 1 as a standard replaceable inner element, MI-construction tailored solutions according to specific needs ATEX-versions, Ex i and Ex d available.
Flanged temperature sensor
Flanged temperature sensor T-F / W-F, according to DIN 43772 2F (datasheet) Features temperature range -200…+1200 °C Pt100 or thermocouple wetted parts material according to the application available also with special coating » Pt100, accuracy class A, as a standard, more accurate on request TC, class 1 as a standard replaceable inner element, MI-construction flange size and type according to the application tailored solutions according to specific needs ATEX-versions, Ex i and Ex d available.
Threaded temperature sensor without cooling neck
Temperature sensors EPIC® SENSORS temperature measuring sensors for various industrial temperature measurement applications. You can find all our temperature sensor standard types 1…23 and information of Ex sensors below. Datasheets of individual sensor types, with corresponding numbering, can be found in the section. To build a correct product code for your application Threaded temperature sensor without cooling neck T-B-ØK / W-B-ØK, acc. to standard DIN 43772 form 2 (datasheet) Features temperature range -40…+250 °C Pt100 or thermocouple (TC) thermowell material according to the application available…
Gauge Hatch Cover
KSPC’s Sampling and Gauging Hatch Cover is designd to provide quick access for product gauging, temperature measurement or sampling, The model KSGH, the sampling and gauging hatch Cover, is designed, manufactured and tested according to the KSPC standard code. KSGH is made to take the fluid samples from the storage tank, to measure the temperature, and to take test of the stored fl uids. KSGH is used under 0.03 kg/cm2 pressure of storage tank. CATALOGUE The model KSGE, the sampling and gauging hatch Cover, is designed,…
Flame Arresster
Flame Arresteris used for preventing flame transmission when an explosion is occurred inside of the piping which full of explosive mixed gas FLAME ARRESTER OPERATION & SELECTION Flame arresters are passive devices with no moving parts. Flame arresters prevent the propagation of flame from the exposed side of the unit to the protected side by the use of wound crimped metal ribbon type flame cell element(Figure 03). This construction produces a matrix of uniform openings that are carefully constructed to quench the flame by absorbing the…
Emergency Vent Cover
→ Emergency relief valve open to greatly increase the venting capacity of petroleum storage tanks when the internal pressure rises above the set point. it remains closed tightly when internal pressure below the settings. VALVE OPERATION & SIZING CALCULATION A. Valve operation Emergency relief valve is the safety valve to protect the storage tank from the inflation(pressure) with the function to discharge rapidly the overpressure developed during external fire around the storage tank or the Excessive fluid intake more than the capacity of pump planned.…
Breather Valve with Flame Arrester
ATEX-KSBB ATEX-KSBS ATEX-KSFI-A_IIA KSBBFI-A/BSFI-A TYPE The…
Breather Valve / Pressure Vacuum Relief Valve
Pressure Vacuum Relief Valve is designed to protect low pressure storage tanks from excessive pressure or vacuum created by thermal expansion (and contraction) and product movement into ( out of ) the tank and at the same time minimizing costly product evaporation/loss VALVE OPERATION & SIZING CALCULATION A. VALVE OPERATION According to API 2000 code, the Pressure vacuum relief valve are designed, manufactured and tested. The Pressure Vacuum Relief Valves are used on liquid storage Tanks which designed by API 520/API 650 and Others process…
Product01
Specifications: